If you’ve been researching industrial-grade motors or components for heavy-duty machinery, you may have come across the dk380c4.0-h8 model. This part has gained attention for its performance, durability, and use in a range of mechanical and industrial applications.
In this in-depth article, we’ll explore what the dk380c4.0-h8 is, how it functions, its technical specifications, and where it fits into modern industrial use. Whether you’re an engineer, a procurement manager, or a tech enthusiast, this guide is designed to offer clear, practical information in a friendly tone that avoids jargon.
Table of Contents
What Is the DK380C4.0-H8?
The dk380c4.0-h8 is a model number that typically refers to a high-performance electric motor or a servo system component used in industrial automation, robotics, or advanced manufacturing setups. It’s designed to offer precise control, efficient power usage, and high torque in demanding environments.
This particular model is valued for its reliability and compatibility with systems that require real-time feedback and tight motion control. With increasing adoption of smart manufacturing and Industry 4.0 technologies, the dk380c4.0-h8 has become a popular choice in various industrial sectors.
Key Features and Specifications
One of the reasons the dk380c4.0-h8 stands out is its robust design and technical capabilities. Below are some of the primary features and specs you can typically expect from this model.
Power and Efficiency
- Rated Power Output: Approximately 4.0 kW
- Voltage Compatibility: 380V three-phase systems
- Efficiency Class: IE3 or IE4, depending on variant
- Speed Range: Typically between 1500–3000 RPM
These features make it ideal for operations that require steady performance and minimal energy loss.
Build and Durability
The dk380c4.0-h8 is usually built using IP65-rated housing, which provides dust-tight and water-resistant protection. That makes it suitable for environments such as:
- Manufacturing plants
- CNC machining centers
- Conveyor belt systems
- Industrial robotic arms
It often comes with aluminum or cast-iron casing, depending on the manufacturer and intended use.
Smart Control Capabilities
Some versions of the dk380c4.0-h8 may integrate smart technologies, such as:
- Encoder feedback for position accuracy
- Built-in sensors for temperature and overload protection
- Support for digital communication protocols like Modbus, CANopen, or EtherCAT
This allows seamless integration into PLC (Programmable Logic Controller) systems and other automation frameworks.
Applications of the DK380C4.0-H8
Understanding where the dk380c4.0-h8 fits in helps highlight its versatility and importance in industrial environments.
Industrial Automation
The dk380c4.0-h8 is a go-to component in automated systems. It is frequently used in:
- Pick-and-place robotic arms
- Automated guided vehicles (AGVs)
- Packaging and sorting machinery
Thanks to its precision and responsiveness, it ensures minimal error and maximized uptime.
CNC Machines and Manufacturing
In CNC machines, the dk380c4.0-h8 offers the torque and speed control necessary for milling, drilling, and cutting. Its consistent performance reduces tool wear and improves manufacturing accuracy.
Conveyor and Material Handling Systems
The model is also popular in conveyor systems where consistent motion, load-bearing capacity, and durability are key. Its compact size and easy maintenance make it an asset for high-throughput operations.
Installation and Maintenance Tips
While the dk380c4.0-h8 is designed for long-lasting performance, proper installation and upkeep are critical.
Installation Guidelines
- Always refer to the manufacturer’s datasheet and wiring diagram
- Ensure proper grounding and phase matching
- Use torque-controlled fasteners to secure the motor
Improper installation can void warranties and reduce the lifespan of the component.
Maintenance Best Practices
- Check regularly for wear and tear, especially on bearings and connectors
- Clean the housing and vents to avoid overheating
- Monitor vibration levels, which may indicate misalignment or internal issues
Routine maintenance every 6–12 months can significantly extend the operational life of the dk380c4.0-h8.
Buying Guide: Where to Find DK380C4.0-H8
Purchasing industrial-grade components like the dk380c4.0-h8 can be tricky if you’re not sourcing from trusted vendors. Here’s what to keep in mind:
- Buy from authorized distributors or OEMs
- Check for warranty and technical support availability
- Request certifications and compliance documentation (CE, RoHS, etc.)
- Compare pricing and delivery timelines
For urgent or bulk purchases, working directly with manufacturers or industrial supply chains ensures better pricing and support.
FAQs About DK380C4.0-H8
Q1: What type of motor is the dk380c4.0-h8?
Most commonly, the dk380c4.0-h8 is an electric servo or AC induction motor used in industrial automation and motion control systems.
Q2: Can the dk380c4.0-h8 be used outdoors?
If it comes with IP65 or higher rating, yes. However, it should be housed properly or installed in enclosures for best performance in outdoor conditions.
Q3: How do I control the dk380c4.0-h8 motor?
It can be controlled using compatible servo drives or inverters that support the specific voltage and protocol (e.g., CANopen, Modbus).
Q4: What is the lifespan of the dk380c4.0-h8?
With proper maintenance, the typical lifespan ranges between 5–10 years or more depending on usage conditions.
Q5: Is the dk380c4.0-h8 available in different power ratings?
While this specific model is denoted as 4.0 kW, similar variants may exist under the same series name with different power capacities.
Conclusion: Is the DK380C4.0-H8 Right for You?
Whether you’re designing a new automation system or upgrading your manufacturing line, the dk380c4.0-h8 offers a powerful, reliable solution. With its strong build, efficient performance, and broad compatibility with modern control systems, it’s a smart investment for any industrial setup.
Always consult with an expert or supplier to confirm compatibility with your specific application. When chosen and maintained correctly, the dk380c4.0-h8 can become a long-lasting asset in your operations.
